NYS IPM Weekly Field Crops Pest Report

Print Friendly, PDF & Email

Volume 19, Number 6

Contents

View from the Field

Alfalfa Weevil

Jodi Putman (CCE Northeast Dairy, Livestock and Field Crops Team) reports high levels of alfalfa weevil in alfalfa regrowth. Other areas of the state are starting to see alfalfa weevil at moderate to low levels in alfalfa regrowth. The action threshold for alfalfa weevil in alfalfa regrowth is 50 percent of the new growth is damaged, with larvae less than 3/8 inch long and no cocoons present, a chemical control may be warranted.

Alfalfa Weevil Shot Hole Damage

Alfalfa Weevil Shot Hole Damage

Small Grains Diseases

Gary Bergstrom (Cornell University) Jaime Cummings (NYS IPM), Mike Stanyard (CCE Northeast Dairy, Livestock and Field Crops Team) and Christian Malsatzki (CCE Ulster County) report low levels of several diseases in small grains. These include powdery mildew, barley yellow dwarf virus, scald, spot blotch, stripe rust, leaf rust, septoria leaf blotch, Stagonospora leaf blotch and Cephalosporium stripe. See the article below on stripe rust.

Black Cutworm and True Armyworm

Mike Stanyard (CCE Northeast Dairy, Livestock and Field Crops Team) reports moderate damage by black cutworm in corn. He also found moderate damage by true armyworm in triticale.

Black Cutworm Damage

Black Cutworm Damage

Slugs

Aaron Gabriel (CCE Capital District), Jaime Cummings, (NYS IPM) and Ken Wise (NYS IPM) report finding low to moderate levels of slug damage in field corn.

This is a photo of slug damage on corn leaves

Snail/Slug Damage

Seed Corn Maggot

Jaime Cummings (NYS IPM) reports low levels of seed corn maggot in field corn.

photo of Seed Corn Maggot

Seed Corn Maggot

Potato leafhopper

Potato leafhopper is being found at low levels in central and eastern New York

Potato Leafhopper Adult

Potato Leafhopper Adult

Stripe rust of wheat management update

(Gary C. Bergstrom, Plant Pathology and Plant Microbe Biology Section, School of Integrative Plant Science, Cornell University)

Stripe rust has now been confirmed in portions of single wheat fields in each of Seneca and Wayne Counties, but to date is not widespread or severe in New York.  Leaf rust has been observed at low severity only in an irrigated research trial in Tompkins Co.  If foliar rusts, but especially stripe rust, become established in a field at or before flag leaf emergence stage, significant yield losses can occur in susceptible varieties. Planting varieties with resistance to prevailing races of specific rust diseases remains the first line of defense against rusts.  Many foliar fungicides applied before flag leaf emergence are effective in management of stripe rust as well as leaf rust (see Table 5.7.1 in Cornell Guide for Integrated Management of Field Crops). These include products containing QoI fungicides (FRAC Group 11), DMI (FRAC Group 3) fungicides and mixed mode of action fungicides.  Once flag leaves have appeared, products containing QoI fungicides should no longer be applied, due to their tendency to result in an increase in mycotoxin contamination in grain.  Both leaf rust and occasionally stripe rust tend to show up after head emergence in New York and that appears to be the case in 2020.  Application of Caramba, Prosaro, or Miravis Ace at wheat flowering (anthesis) provides excellent control of stripe or leaf rust that may otherwise develop on flag leaves during early grain filling stages.  In replicated plots in 2016, we saw significant reduction in stripe rust (from 5% of flag leaf area rusted to not detected) with application of Caramba or Prosaro at anthesis.  Fungicide emergence should cease by the end of anthesis to avoid illegal residues based on days to harvest restrictions.

This photo shows the difference in stripe rust and leaf rust on wheat

Difference between leaf rust and stripe rust

Black Cutworm Captures

This is a map of black cutworm captures for June 1 to June 8

True Armyworm Captures

This is a map of true armyworm captures for June 1 to June 8

 Alfalfa Weevil, Seed Corn Maggot and Base 50 F Degree Days

June 14, 2020

table of degree days for alfalfa weevil and base 50 degrees

Stage  

Alfalfa Degree Days Life Stages

(Base Temperature 48F)

Egg Hatch                   280

Instar 1                        315

Instar 2                        395

Instar 3                        470

Instar 4                        550

Cocooning                  600

Pupa                            725

Adult Emergence     815

Black Cutworm and True Armyworm Degree Days

June 14, 2020

table of black cutworm and true armyworm degree days in New York State

Black Cutworm Degree Days (Base 500 F) Lifecycle Growth Stages

Degree Days               Stage                           Feeding Activity

0                                  Moth Capture              Egg Laying

90                                Eggs Hatch

91-311                         1st to 3rd Instar           Leaf Feeding

312-364                       4th Instar                     Cutting Begins

365-430                       5th Instar                     Cutting Begins

431-640                       6th Instar                     Cutting Slows

641-989                       Pupa                            No feeding

Source: University of Minnesota Insect Pest of Corn-Stand Reducers Black Cutworm

 True Armyworm Degree Days (Base 500 F) Lifecycle Growth Stages

Degree Days               Stage                           Feeding Activity

0                                  Moth Capture              Egg Laying

113                              Eggs Hatch

612                              Larval stages               Leaf Feeding

909                              Pupa                            No feeding

Source: Scouting for True Armyworms Is Highly Recommended in Small Grains and Early Corn-University of Kentucky

 

Clipboard Checklist

Keith Waldron, NYS IPM 

 General

*Walk fields to check general field condition, weed issues, areas of soil erosion

*Watch for early season weeds: winter annuals, chickweed, henbit, field penny cress, shepherd’s purse, giant and common ragweed, purple deadnettle, lambsquarters, redroot pigweed, velvet leaf, Pennsylvania smartweed, common sunflower, quackgrass, foxtail

 

Alfalfa:

*Evaluate established legume stands for approximate days til harvest
*Monitor regrowth for alfalfa weevil, potato leafhopper
*Monitor new seedings for Pythium blight and Phytopthora Root Rot.

Small Grains:
*Monitor winter grain fields for growth stage, disease issues, cereal leaf beetle
*Check stands for diseases, cereal leaf beetle, weed escapes

*Monitor wheat for potential risk of fungal disease issues – consult Fusarium Head Blight

prediction model

Corn:
*
Conduct plant population assessments, early season corn pests including seed corn maggot, white grub, wireworm, black cutworm, armyworm, slugs, diseases, weed issues, vertebrate damage

Soybeans:
*
Post emergence weed evaluation, timely cultivation and/or weed management
*Conduct plant population assessments, early season corn pests including seed corn maggot, slugs, soybean aphid, diseases, weed issues, vertebrate damage

Pastures:
*
Check and mend fences as needed.
*Check crop growth
*Invasive species, plants harmful to livestock
*Review/Plan rotation system

Equipment:
*Remove / clean soil and crop debris from equipment
*
Arrange for custom weed control or check your own application or cultivator equipment for repairs.
*Carry appropriate / necessary NYS DEC and EPA required documents: (pesticide applicators license, pesticide labels, MSDS sheets, etc.) with application equipment
*Calibrate:

  • planting equipment – maintain records on planting rate per field
  • manure spreaders – maintain records on amount spread per field
  • pesticide application equipment – Check nozzles, pumps, etc., recalibrate pesticide application equipment before use. Maintain pesticide use records

Storage:
* Check stored grain bins for temperature, moisture and signs of mold and insects. Aerate, core, transfer grain or treat as necessary
*
Check forage allocation and anticipate feed program adjustments as forages from previous year are used up
*Plan where forages should be stored for optimum allocation next feeding season
*Mow around storage bins and facility to minimize pest hiding places

Dairy Cattle Barn Fly Management:
*Monitor animals and barn area for house fly, stable fly and other pest management needs including presence of rodents and birds.
*Check facilities for favorable fly breeding conditions: (organic matter + moisture): leaks in watering systems, roof gutters for leaks and potential overspill, drainage,
*Sanitation, sanitation, sanitation – clean animal resting areas, feed troughs, minimize source of moist organic matter i.e. fly breeding areas in barn and in adjacent animal loafing yard
* Continue fly monitoring: install “3X5″ index card fly speck monitoring cards throughout barn
*Use, replenish, replace fly management materials: sticky fly tapes/ribbons, insecticide baits, natural enemies (parasitoids), fly population monitoring (3 x 5) spot cards
*Consider purchase and release of Muscidifurax raptor and/or M. raptorellus natural enemies of house and stable fly pupae.

Dairy Cattle on Pasture:
*Monitor animals for presence of face flies, horn flies and stable flies. Action guidelines: face flies (average 10 per animal face), horn flies (average 50 / dairy per animal side, 200 / beef cattle per animal side), stable flies average 10 per animal (all four legs)
*Check feed bunk / water source locations for signs of stable fly breeding (moist undisturbed organic matter – spilled feed, round bales, etc.), minimize source of moist organic matter i.e. fly breeding areas in barn and in adjacent animal exercise yard.
*Check pasture for forage quality / quantity, rotate as appropriate
*Check pasture for vegetation poisonous to livestock
*Consider use of pasture fly traps to help reduce deer, horse and stable fly populations